What are the bonding requirements of alkali resistant fiberglass mesh? Anti cracking protection layer construction, alkali resistant fiberglass mesh cloth why not dry lap?
At the four corners of the doors and windows, an alkali resistant fiberglass mesh must be attached along the 45 degrees, and a net cloth must be added to the four corners of the entrance.
Yin angle net to alkali fiberglass cloth pressure stubble lap, the width of not less than 50mm; Shenyang Kok should pressure stubble lap width shall be not less than 150mm; the mesh mortar joint should be full of 100%, at the same time to smooth, straight, keep the founder and the verticality of yin and yang.
The bonding width of alkali resistant fiberglass mesh shall not be less than 50mm, and the edge of alkali resistant fiberglass mesh cloth shall not be dry lapped, and must be embedded in anti cracking mortar.
The alkali resistant fiberglass mesh cut edges cut, the length of not more than 3m, with mortar on a thermal insulation layer, the thickness control in 3-5mm, immediately wipe the alkali resistant fiberglass mesh with iron containing zirconium glass fiber mesh to the substrate, coated alkali resistant rubber material, is the anti crack protective layer supporting products.
