For example, according to the shape, the injection quantity, clamping force, and electric, all electric ^^^ hope to get a more comprehensive answer Thank you!!!
As the structure and types of injection molding products are relatively large, the injection molding machine used for molding injection products is also more. The injection machine is classified according to the following ways:1. classify the raw materials by plasticization and injection.2., according to the injection machine configuration, different classification.3. classification according to the processing capacity of injection molding machine.4. according to the special use of the injection machine classification.According to the classification of raw materials plasticizing and injection methods, the injection machine can be divided into: (1) plunger type, (2) reciprocating screw type and (3) screw, plasticizing plunger, injection type three.According to the structure of the injection machine, it can be divided into: (1) vertical injection molding machine, (2) horizontal injection machine, (3) angle injection machine, (4) multimode injection machine, (5) combined injection machine.According to the size of the processing capacity to the injection machine classification, can be divided into: (1) ultra small injection machine, (2) small injection molding machine, (3) medium-sized injection molding machine, (4) large injection machine (5) super large injection molding machine.By use of the injection machine can be divided into: (1) general injection machine, injection machine exhaust (2), (3) high speed precision injection machine, injection machine (4), (5) three plastic shoes injection head single mold injection machine, double head two (6) injection mould injection molding machine.
Shape can be divided into: horizontal, verticalInjection molding, then small to the product weight, 1G large to a few kilograms have, quite a lot.Because now the injection molding machine manufacturers are based on customer demand to do injection molding machine configuration, such as the general 180T clamping force of the frame, with 36-38mm screw, now the same rack can be the smallest 20mm screw. Should say, as long as you ask what kind of can match what kind of, so that the injection molding, mold force is now not necessarily, according to your product requirements to configure!
More and more like a computer, you can DIY it! Ha ha......As for the electric and full electric is very simple, electric refers to injection pressure preservation, feeding is the use of electric motors as the driving force, which is an electric injection molding machine relatively early model. Now all electric machine is every action is using the motor as a driving force, die opening and closing a top top back motor, a motor, injecting and feeding a motor, a motor and Zuosi retreat...... However, the number of motors in different brands is not necessarily the same, of course, the more expensive the motor, the more accurate the movement, the higher the efficiency, the lower the cost of the product!The above is purely personal experience, and I hope I can help you!
