What are the concrete steps for solid wood furniture? What equipment is used during the period?
Dry ingredients - wool processing - processing - bending - Glued net material processing - assembly - Part - assembly and finishing (1): dry sheet, wet wood by drying or natural drying, the moisture content of materials is controlled in a certain range, with the use of the furniture area of wood equilibrium moisture content adaptation. The moisture content of other materials used in furniture manufacturing, such as laminated wood, laminated wood and various artificial boards, shall be controlled.
The solid wood furniture processing technology main content is the solid wood part processing craft. The process of solid parts by means of shape, size or physical properties of various processing equipment change of raw materials, the processing of raw materials into products meet the technical requirements, the sum of a series of work carried out by the called process. It consists of several processes.
Reasonable selection of materials: according to product quality requirements and characteristics to select tree species, texture, color, etc.. All parts of high-grade furniture use the same tree species as much as possible. If the selected tree species is precious, then the cost of furniture will be high. The supporting furniture parts should be considered strength, and so do ordinary furniture.The reasonable determination of machining allowance and moisture: moisture content and uniformity, no internal stress, prevent warping and cracking in the processing and use process; according to the equipment and process how reasonably set aside the allowance.Rational selection of batching methods: generally, the principle of multiple wool should be followed. That is, the length, width and thickness of wool and material can be multiples. The best scheme is that the section sizes of wool and stock are equal (there should be a certain amount of processing allowance), and the length is the multiple of the machined parts. The aim is to reduce waste and improve production efficiency.(3) wool processing: the sawn timber is machined into the exact size parts, providing accurate positioning standards for net material processing.(4) bonding process: mainly fingerboard lumber glued, hollow board, veneer manufacturing etc.. (5) bending processing: mainly refers to bending of solid wood, veneer gluing, bending, sawing, bending and so on.(6) net material processing mainly refers to: tenoning, drilling, slotting, car shape, copying, engraving and milling, mortise and polished.(7) component assembly: the parts are assembled by tenon, mortise structure, round tenon joint, adhesive, nail, wood screw and hardware connector.(8) parts processing: mainly refers to the assembly of parts processing, such as the door re - Amendment, sanding.(9) general assembly and finishing: connecting parts and parts in a certain way and then painting.
