What are the concrete vibratory machines
The main concrete vibrators used in the construction site are: insert vibrators and plate vibrators
Anyone who is a professional manufacturer of sales vibrators should say that the size of the building industry is bigger than the boss
The mixing vibrator vibrates mechanically according to its way of transmitting vibration: internal vibrator, and external vibrator, (1) internal vibrators. Internal vibrator is also known as plug-in vibrator (vibrator), usually for vibrating cast-in-place foundation, column, beam, wall and so on and after the foundation of concrete structures. Using plug-in vibrator compacted concrete, vibration rod should be vertical insert in the concrete, synthesis as a whole to enable the lower level of concrete, concrete vibrators shall be inserted into the lower 50 mm. The vibrator should not move about 1.5 times more than its radius. The vibrator is not more than 1/2 the radius of the vibrator. The vibrator should avoid colliding steel bars, templates, core tubes, rings or embedded parts. (2) the external type vibrator: external type vibrator is also called plate-type vibrator, the attached type vibrator, is at the bottom of the vibrator is installed on prefabricated template or lateral, vibrating when put the vibrator in the concrete structure surface, good vibration can be passed to concrete vibrator of base plate. When used, the bottom board of the vibrator is in contact with the concrete, and the concrete is no longer sinking, the surface is returned to the mud, and then moving to the next position. The motion spacing of the plate vibrator and attached vibrator should ensure that the floor of the vibrator can be covered to the edge of the vibrating part.
