What are the connecting methods of steel plastic composite pipe and pipe fittings?
The C type lock onto the nozzle position, with the spanner nut screwed on the threaded pipe fittings in vitro.The installation tools: tube shear, adjustable wrench, reamer etc..And if not round, by rounding the tube in special reamer round hole.
Push the pipe at once to the root of the pipe socket. When pushing the pipe, attention should be paid to the location of the rubber ring. It shall not be extended or tilted. If there is a top tilt, the groove of the pipe mouth shall be corrected and pushed into the rubber ring to be pushed again.
Fit the sleeve nut and the C lock ring to the nozzle.
The first tube straightening, and then design the length of the pipeline, by cutting with scissors or sewing tooth, opening shall be smooth, the end should be perpendicular to the pipe axis, tube mouth officer with special reamer groove, the slope is 20. One 30. The depth is 1 - 1.5mm. After the end of the groove, clean the debris with clean cloth.
