What are the differences between axial and oblique strikes of hydraulic generators?
Axial flow:For low head water, the height of water head is below 10 meters. The amount of water needed is relatively large, equivalent to the amount of water above the 160mm pipe. The axial flow type of the old section needs to be constructed with cement or other materials before the installation of the water diversion channel and the vacuum vortex chamber. The indirect cost is relatively high and the project is relatively large. The new "axial flow type vortex axial flow type, this machine is not also built aqueducts and vacuum vortex chamber, directly connected pipes can use. Head height of about 2 meters, with 160mm water pipes filled with water, you can use the 300W machine. With 200mm tubes, you can use 1KW's machine. Of course, there are many matches.
. The higher the head drop, the greater the power required to meet the requirements of the pipe. This form can be divided into new and old and new turgo "double double turgo", "four ring pipe spray turgo", according to the change of water source, adjust the number of switching nozzle, make better use of water resources.
Oblique impact:For medium and high head water sources, from 10 meters to 100 meters head water can be, the relative water demand is not so great. Water head drop is about 10 meters, 75mm pipe water diversion, you can use 300W, 600W and other power machine
