What are the functions of E506 structural steel welding rod, which material is suitable for processing?
Compared with J507, one is low hydrogen potassium type, one is low hydrogen sodium type, and 506 because of adding arc stabilizer, it can be AC and DC dual-use.
You say E506 structural steel welding rod, the correct welding rod brand should be written in E5016 or J506, the former model, and the latter is the brand.E5016 welding rod is a kind of alkali and direct current welding electrode. It is mainly used for basic welding rod which is not used by DC welding machine and welding with AC welder. The material used is the same as J507, and is used for 16Mn (Q345) grade steel.When welding the electrode, the process performance is worse than that of the acid welding rod, that is, spatter is bigger and weld formation is poor. But the metallurgical properties are better, that is, the anti - parathion of welding rod is harmful, and the welding seam has strong anti - crack ability, so it is used in welding of important welding seam. However, this kind of electrode tends to be larger than the direct current alkaline electrode (E5015 or J507), so it is seldom used in welding seams (e.g. pressure vessels) that require inspection.
Electrode brand: J506, model: E5016 (E506 is wrong writing). It belongs to low alloy structural steel welding rod.Welding rod brand: J506, model: E5016 belongs to the low hydrogen potassium alloy structural steel welding rod. Good crack resistance. All position welding. Polarity welding requirements: AC welder (no-load voltage is not lower than 70V, the load rate of not less than 60%, the output of the welder welding current is not less than 300 Amperes) reverse DC (ground electrode connected to the positive electrode welding -, +).For 16Mn low-alloy structural steel, 09Mn2Si welding.
