What are the parts of the skateboard?
4. bracket (bridge):Bracket, which we refer to as "bridge", is the most widely used skateboard, which has the most twisting force, the most extrusion and the most friction. The bridge is usually made of alloy casting, and the process and design of the brands are different. The bridge is divided into the middle, the low and the middle axle, and the length of the bridge is different from the width of the surface.It's important to choose the right equipment for skateboarding. A skateboard is made up of several different components. The part is different from the terrain and the style of the skateboard. In general, the skateboard consists of the following components:1, board (deck), 1, usually with five layers, seven layers, nine layers of maple wood, microwave cold pressing. There are also aluminum alloy, carbon fiber and other materials made of board. Now the panels, the head, the end of the board are tilted. The individual's favorite pattern is the 20cm*81cm size with a slightly rounded head. 22cm above the surface, basically can be regarded as U pool plate, the plate can accommodate more feet, make it more robust in the U pool. About 19cm of the plate, mostly in flat road conditions used in the surface, sub class board with small wheels, start the action to agile, quick. In addition, the different companies of the board, the foot of the nest is not the same depth. Some skaters prefer the foot deep panel, which makes it easier to do the action of turning over the plate, and makes it more stable when doing OLLIE.
2. cushion and cover:It mainly acts as buffer and shock absorption. First, the utility model has the function of shock absorption when the convex and concave of the road surface is not normal; the second is that the utility model plays the role of protecting the part in the large amount of movement; and the third is that the utility model plays the role of keeping the balance of the body.3. panel:General use of Canada Maple multilayer board compression, compression process is divided into cold and hot pressing, cold pressing, that is, without adding glue, directly compression wood chips, more advanced, better performance. The board has high strength, good impact toughness and good elasticity, and ensures that the pedal is not damaged when jumping on the slide board at a certain height.
Slide board structure mainly consists of board surface, sand paper, bridge (support), PU, wheel, bridge end nut, bridge nail, cushion, bearing and so on.1. wheels:When choosing materials, we should consider that it is suitable for different sites, such as floor, road surface, cement road, asphalt pavement, etc.. No matter what road is on the slide, the wheels should have good elasticity and wear resistance, and the hardness should be moderate, but also ensure that the wheels have enough friction coefficient on the road surface. (wheel hardness coefficient generally has three units, A, B, D, because some materials and indicators are different, so it can not be accurately converted.)
