What are the precautions and corresponding regulations in the construction of aluminum slabs?
The installation of the aluminum plate is not complicated, pay attention to Yuba, water heater, exhaust fan, hood, lamp installation sequence with a good, do not put the fan (Yuba) directly with screws installed on the aluminum plate. Otherwise the installation of the aluminum plate to open the exhaust (Yuba) owners will find a "buzzing" sound, because hanging off the aluminum plate after the top of the closed space will form a resonant cavity, regardless of fan (Yuba) mute effect How good will be expanded many times. The correct installation order is: first installed Yuba, exhaust fan, and then do aluminum hanging plate ceiling (Yuba, exhaust fan can be used with expansion bolts and wire hanging directly at the top of the coagulation. Best without wire, steel wire plasticity is poor).
Aluminum slab ceiling decoration quality requirements:
The materials used for the ceiling (eg, the cover panel, the keel) must meet the national quality standards.
The variety, style and specifications of the materials used for the ceiling must meet the design requirements.
The mounting position of the keel must be correct and secure, and the keel should remain straight, without bending, without deformation.
Mask version to maintain integrity, no Alice, delamination and other defects, the installation needs to be installed firmly.
Hanging parts, connectors should meet the requirements of the product portfolio.
Aluminum slab plate ceiling construction Note:
From the beginning to the end of the ceiling construction, we should pay attention to protect the roof of the various pipelines are not damaged.
During the construction process, all kinds of keel and boom are forbidden to be fixed on the ventilation ducts and other equipment parts, only on the roof board.
In the handling, storage, use of materials in the process, to prevent material deformation, moisture and rust.
Attention to protect the windows and doors installed is not damaged.
Light steel skeleton can not be stampede; other types of hanging parts shall not be hanging on the light steel skeleton.
Before covering the cover plate, make sure that the pipe in the ceiling has been inspected and that the mask plate is installed after acceptance.
