What are the precautions in the installation of vibrating screens?
Installation notes:1) if the equipment is installed on the platform, please pay attention to the strength of the installation platform, there must be no resonance problems.2) the four mounting points of the equipment must be on the same horizontal plane.3) 100mm spacing should be maintained at least between the equipment and other objects.4) equipment and up and down process equipment must be flexible connection, please pay attention to the material.
Common trouble shooting of equipment:1) seals are damaged faster:Observe whether the beam ring is locked - fasten the tie ring boltThere are traces of movement - securing the beam ring boltsMaterial temperature: replace seals, material for high temperature sealing.2) the screen is easy to damage:The screen does not tighten - replace the adjusting screenUneven material - change the blanking method or install the distributorInstant more material - change the blanking way or install cloth distributorForeign material in the material - pay attention to the control of the process
Daily maintenance of equipment:1) the initial operation of the equipment, the first 7 working days for the machine test run stage, please check the equipment every day, according to the test run stagePrepare the status and adjust the regular inspection time. The scope of inspection includes: tightening of fastening bolts of various parts (such as beam ring bolt, motor)Fastening bolts) and screen mesh (screen plate) is there fatigue or breakage?.2) shift (8 hours per class), the staff of fasteners (please ring bolts, bottom bolts) for fastening; 3) in strict accordance with the vibration of the motor manual regularly with reasonable amount of grease. The use of 3# the Great Wall lithium grease oil bearing, every 300 hours, please check and maintenance.4) vibration motor installation: vibration motor installation should use torque wrench, pay attention to each fixed bolt fastening can not be fixed onceFixed in place, the average number of times to tighten to the best state, the fixed bolt for class 8.8 high-strength bolts.5) the screen shall be inspected at each shift. It is suggested that the service life of the screen be determined by using the screen periodically during the critical periodReplace. Case: the service life of the continuous two screen mesh is 40 days. It is suggested that the screen mesh be replaced in 35 days.
