What are the simple pressure container factory data?
The manufacturer shall provide the user with the certificate of the product, the use of the instruction manual, the completion drawings (the photocopy) and the inspection certificate issued by the supervision and inspection authority.
TSGR0003-2007 "simple pressure vessel safety technical supervision regulations" Article 38. Before a simple pressure vessel is made out of the factory, the manufacturer shall install the simple pressure vessel nameplate in the obvious place where the design is determined. The nameplate shall at least include the following: (1) the name of the manufacturing unit and the number of the manufacturing license; (2) the name and number of the products; (3) manufacturing dates; (4) design pressure and design temperature; (5) the recommended life span; (6) working medium. The manufacturer shall provide the user with the certificate of the product, the use of the instruction manual, the completion drawings (the photocopy) and the inspection certificate issued by the supervision and inspection authority.
The manufacturing unit shall provide at least the following technical documents and materials to the use unit when the pressure vessel is out of the factory (1) completion pattern and completion pattern should have permission to design unit seal (photocopy is invalid), and completed affix a stamp (as-built stamp on manufacture unit name, license number, check the signature of the person and the word "completion"); If happened in the manufacturing material substitution, NDT methods change, processing size change, such as manufacturing units in accordance with the requirements of the design unit the written approval documents on completion pattern to make a clearly marked, labeled with the signature of the modifier and modified date; Product certificate (2) pressure vessel (including the product data sheet, style see appendix B), and product quality certificate (including the main pressure parts material certificate, bill of materials, quality plan or inspection plan, the structure size inspection report records, welding, NDT, heat treatment report and automatic logging curve, the pressure test and leakage test report, etc.) and product nameplate rubbing or photocopy; (3) supervision and inspection certificate of special equipment manufacturing (applicable to products that carry out supervision and inspection); (4) design documents for pressure vessels specified in this procedure 3.4.The product of the product of the head and forgings The unit of manufacture of pressure vessel under pressure vessel such as seal head and forgings shall provide the quality certificate of the compression element to the ordering unit. Complete data on site welding Field compound welding of the pressure vessel after completion and acceptance, the construction unit in addition to providing this SOP 4.1.4.1 and 4.1.4.2 requirements of technical documents and data, also compound and quality inspection of technical data shall be provided to use the unit.
