, first step of film sticking: aim the film marked ① at the screen and pull the ① layer of release liner label, slowly tear a part of this layer, pay attention not to touch the adsorbed layer (middle layer) of the protective?film with fingers. Second step of film sticking: aim the adsorbed layer at the screen corner, make sure that the position is aligned, smooth the film carefully while tearing off the backing layer ① release liner. Because present protective film has electrostatic automatic adsorption function, generally it does not need be ironed too much. The action should be slow when sticking the film, and it is recommended to start sticking along the long side of the screen, from point to line, from line to surface successively
First step of film sticking: aim the film marked ① at the screen and pull the ① layer of release liner label, slowly tear a part of this layer, pay attention not to touch the adsorbed layer (middle layer) of the protective?film with fingers. Second step of film sticking: aim the adsorbed layer at the screen corner, make sure that the position is aligned, smooth the film carefully while tearing off the backing layer ① release liner. Because present protective film has electrostatic automatic adsorption function, generally it does not need be ironed too much. The action should be slow when sticking the film, and it is recommended to start sticking along the long side of the screen, from point to line, from line to surface successively
The methods of sticking film for computer screen: 1, Generally, if you dig the corner of the laptop protective?film with yuor fingers, it is very easy dig up a corner, and then pull the corner to tear off the laptop protective?film. 2, if it can't be digged up with fingernail, you can prepare two glue to stick a corner of the bottom edge, stick up a corner of the electrostatic film, and then pull the corner to peel off laptop protective film easily. Attention： General protective film is electrostatic film, which can be used repeatedly, so try not to use sharp things to help to tear off the film, which may result in failure to reuse.
