What are the technical requirements for titanium rods?
After the hot working by the car (grinding) light rod bar length should not be greater than half the size of its tolerance
After the thermal processing by the car (grinding) light bar and cold-rolled, cold-drawn bar diameter tolerance should be consistent with the provisions
The diameter or side length of the hot-worked bar and its permissible deviation shall be in accordance with the regulations
Titanium and titanium alloy bar chemical composition should be consistent with GB / T 3620.1, the provisions of the re-inspection, the chemical composition of the allowable deviation should be consistent with the provisions of GB / T 3620.2
The length of the bar is less than 300-6000mm, the length of the bar is 300-2000mm. The length of the length or length should be within the length of the length
