There are several types of tiles:
According to the use of points: outside the wall, the wall, floor tiles, square brick, industrial tiles and so on.
According to the molding points: dry pressure molding brick, extrusion molding brick, plastic molding brick.
Ingredients: oxidized tiles, reduced tiles.
According to glazed: glazed tiles, no glazed tiles.
According to the water absorption points: porcelain tiles, stoneware tiles, fine stoneware brick, stoneware brick, ceramic brick.
According to varieties: polished tiles, antique tiles, tiles, all cast glaze, throwing crystal tiles, microcrystalline stone, split brick, square brick (cultural brick).
According to the production process points: printing tiles, polished tiles, spot bricks, crystal tiles, no glazed tiles.
Tiles, tiles, is a refractory metal oxide and semi-metal oxide, through the grinding, mixing, pressing, glazing, sintering process, and the formation of an acid-resistant porcelain or stone, such as the construction or decoration Of the material, collectively referred to as tiles. The raw materials are mostly made of clay, quartz sand and so on.
2, the wave of brick: wave with the polishing turn similar, but the production requirements higher, requires a better press, to suppress a higher density, while firing a higher temperature, can do all-ceramic.
Wave is to strengthen the polishing of the polished, the surface is generally no longer need to polish the treatment is very bright, to a certain extent, to solve the problem of polishing easy to dirty. Of course, the price of the wave is more expensive than polishing.
Summary: polished and polished tiles because the surface is bright, so beautiful, while high wear resistance, but there is a single color, easy to dirty, non-slip and easy to penetrate the color of liquid and other shortcomings, these two bricks are generally larger, the main For the living room, the door and other places, rarely used in the bathroom and kitchen and other places
1, polished turn: the type of brick with clay and stone powder pressed by the press, and then fired from the front and the opposite color, not on the glaze, burned, the surface and then polished, so positive It is very smooth, very beautiful, the back is the original face of the brick.
Polished we all know? Such as stone floor and wall, is polished, stone province is not bright, but polished, it looks very bright.
Since it is polished, the problem will follow, because the smooth, bright, so it is not dirty, and dragged with a mop, will leave the water mark, because your mop can not be 100% Clean it, like the same glass, so if you want to clean, it is more effort;
The second drawback is that polished because of smooth, so it is not slip, that is, once the water on the ground, it is very slippery, which is why we see the building inside the stairs and other shops are not the stone Cast into light, but matt, the only way to non-slip.
The third problem is the color of the liquid is easy to penetrate, the simplest test is to take the pen in the brick surface to write a few words, poor polishing turn, immediately wipe after writing, are not necessarily able to clean, writing may have infiltrated Well, good brand, because the press is good, high density, coupled with the firing of the high temperature, the density is very high, so it is not easy to infiltrate, but this is not absolute, no matter how good the polishing, if write the word 10 Minutes and then rub, but also must leave the traces of never wipe, because the ink has been infiltrated into the brick inside.
