what recyled things will the garbage ppl take and recyle thme beside paper adn water bottles?
Sometimes, you can take the nut off of the truss rod, and put a shim or washer in there, which may give you a couple more turns, ? You are right in not trying to adjust the neck too far at a time, The guitar has been out of adjustment for so long, means you need to adjust it slowlyI can't help you with the bridge, without seeing the guitar, but a different bridge may help? It may also need a fret level job?
The other answerer was correct about checking the frets, but if the neck is warped too badly, you might have to shim the neck, which is really something that should be done by a guitar repair techYou should also look into possibly replacing the neckwarmoth makes some pretty economical replacement necks.either way good luck with your project!
The Squier's big brother the Strat value for the tone capacitor variesWith 500k pots, it is typically .033μfWith 250k pots, it is typically .02μfHowever depending on which SRV wiring kit you get the tone control (mylar) capacitor is includedOptions, maybe consider a humbucker for the bridge pickupYou'd need a switch to change between HSS and SSSHave the frets stonegound for a nice low action (not cheap but worth it)Use Ernie Ball Super Slinky 9thou stringsIf you want to be adventurous make your own scratchplate out of transparent perspexYou can paint, spray or even glue on a picture on the bottom and you get the depth of the perspex over it that makes it look really deep and shiny as if under loads of layers of varnish.
Paper: paper, boxes, clean paper plates (not smothered in food), magazines Plastics: Bottles, cans, aluminum foil, grocery sacks, styrofoam and many other things!
