What do you do in the off angle valve inside the elbow.
This is very troublesome, if water pipes buried in the wall, with a special tool to beat small Zan, hammer. You can't fix itIf you're outside the wall, change the elbow.
Now only to flog a dead horse. (1) dry water stains, spray a little loose rust agent, with solid against the broken wire, lightly on the solids, then the appropriate size into riffler (tight) Neisili, pulling plate and drive the wire exit riffler. (2) go to the hardware market to buy English, and then re attack, you can first use a small number of attacks. (3) with the broken steel wire saw from the inside out, divided into three sawing, sawing depth less than wire thickness, and eliminate chisel. (4) reaming with a garden file and tapping with an outside wire. Attention should be paid to the sawing or filing of the front and back movements should be small, not to non-metallic elbow chisel leak. Have a try!
(1) dry water stains, spray a little loose rust agent, with solid against the broken wire, lightly on the solids, then the appropriate size into riffler (tight) Neisili, pulling plate and drive the wire exit riffler.(2) go to the hardware market to buy English, and then re attack, you can first use a small number of attacks.(3) with the broken steel wire saw from the inside out, divided into three sawing, sawing depth less than wire thickness, and eliminate chisel. (4) reaming with a garden file and tapping with an outside wire. Attention should be paid to the sawing or filing of the front and back movements should be small, not to non-metallic elbow chisel leak.
