I bought a f20 motor (Type r Accord) but it came with no ecu its being swapped into a 92 accord I know most of these parts are interchangeable but I want to make sure. What is the name of this ecu for this engine? p28? or can i just buy h22 ecu and wiring harness and call it a day?
you should be able to use your stock harness. as for the ecu you could use the p13 which is for the h22. or get a chipped ecu set for your engine. phearable /
the computer that you need for the swap is a p13 witch is the h22 ecu Just that the one that comes on the type r is a lil different. p28 is for b and d series motors. Good Luck with the build
I'd recommend that you try and find a U pick/pull auto wreckers and hopefully they will have some vehicles like yours so you can not only find a good replacement harness but also learn more about what exactly is involved.Basically any harness has male-female plug in connectors that may run from under the hood to different comps and sensors etc and it could run to the inside of the vehicle to a fuse box or fuse box connector.Some harness's run along the engine and plug into different devices such as the fuel injectors etc then runs to some firewall etc plug in connectors.Many of different ground wires that may run to the frame/chassis or battery. Hope that helps and best of luck.By the way don't forget to clean the ground surfaces and the wire o-ring connectors with a wire brush and sandpaper etc before you install the replacement harness.
