Semi-brick partition of the logo size of 120mm, made of ordinary brick piles.
Ordinary brick partitions generally use half brick partitions. Semi-brick partition of the logo size of 120mm, made of ordinary brick piles
Usually the meaning of a brick, refers to the standard brick width of 120mm, half brick refers to the thickness of the brick (that is, brick up to put) 60mm. Half brick wall is the brick up the masonry wall, not plaster, then wall thickness 60mm.
When the masonry mortar is M2.5, the height of the wall should not exceed 3.6m, the length should not exceed 5m; when using M5 mortar masonry, the height should not exceed 4m, the length should not exceed 6m. When the height is more than 4m, the long reinforced concrete belt shall be provided at the door beam. If the length is more than 6m, the brick wall shall be provided. As the wall is light and thin, the stability is poor, so the structure requires the wall and the load-bearing walls or between the column firmly connected, generally along the height of every 0.5m into the 2ф4 steel, but also along the wall height every 1.2m Set a 30mm thick cement mortar layer, put 2ф6 steel. In order to ensure that the wall does not bear the weight, at the top of the partition and the floor at the junction, the brick should be a piece of brick, or about 30mm gap plug wood mold tightened, and then mortar filling.
