What is required when towing the vehicle?
A traction trailer is a powered vehicle that draws other unpowered vehicles. After the trailer is towed by the vehicle, the vehicle body is increased, and the loading basin is increased, so that the driving operation is difficult. Therefore, the "Regulations on the implementation of the road traffic safety law" stipulates:Trucks, semi trailers, tractors, tractors are only allowed to pull 1 trailers, trailer lights signal, brake, connection, safety protection and other equipment, and should comply with national standards;Small passenger cars are only allowed to tow trailers or three of the total, and trailers below 700 kg may not carry passengers;The loading basin of the towing trailer of the truck shall not exceed three of the carrying capacity of the truck itself, and large and medium-sized passenger cars, low-speed freight cars, three wheeled vehicles and other motor vehicles shall not be allowed to pull the trailer.
A traction failure vehicle is a rear vehicle powered by a vehicle that temporarily loses power after a fault. Regulations on the implementation of the road traffic safety law:The driven motor vehicle shall not be manned except the driver and shall not carry the trailer;The width of the motor vehicle to be towed shall not be greater than the width of the traction motor vehicle;When using a soft connection for It, the distance between the tractor and the tractor should be greater than 4 meters and less than 10 meters, as shown in figure 3-23;The tractor that is used for braking failure should use hard connection traction and t traction:Both towing and towing vehicles should open dangerous quotation flashing lights;The truck crane and wheeled machinery shall be towed vehicles, motorcycles or other vehicles are not towing vehicle traction;The steering failure or lighting signal device fault of motor vehicles, should use special wrecker towing.
