What is the difference between high and low speeds in a stepper motor?What is the range of medium speed, high speed and low speed? The motor is made in China, and the race is also driven by the motor 86
With this current for stepping motor power supply, stepper motor can work normally, the driver is for stepping motor time-sharing power supply. Induction step stepper motor, in a certain extent can be seen as low-speed synchronous motor. A four phase motor four phase operation,... 1, structure: uniformly distributed rotor with many small teeth, the teeth of the stator with three excitation winding, the geometric axis respectively how to correctly choose the servo motor and stepper motor? Mainly depending on the specific application situation, simply to determine the nature of the load (such as horizontal or vertical load), torque, inertia, speed, accuracy, speed and other requirements, the control requirements (such as port of interface and communication requirements), the main control mode is position and torque or speed the way. Is the power supply DC or AC power, or battery powered, voltage range?. Accordingly, a model of the motor and the fitted drive or controller is determined. 2, choose stepping motor or servo motor system? In fact, the choice of what kind of motor should be based on specific application conditions, each with its characteristics. 3, how to match the stepper motor driver? A driver that is greater than or equal to the current according to the current of the motor. If low vibration or high accuracy is required, a subdivided drive can be used. For large torque motors, high voltage type drives are used whenever possible to achieve good high speed performance.
Stepper motor itself is low-speed motor, high-speed running less than 1000RPM, of course, idling can be best, generally in 600rpm, at high speed can only be servo motor
