What is the material needed for the production of RTV silicone rubber 107?
Purpose: JW-IS-90/G is insoluble sulfur content accounted for more than 90% of the total sulfur content of insoluble sulfur, after adding antistatic treatment, made of rubber carrier and dispersing agent, made after the parent particles with good dispersion, both natural and synthetic rubber, after mixing can avoid migration and spray frost of sulfur, so as to maintain the stability and safety of compound storage.To avoid the premature conversion of insoluble sulfur into soluble sulfur, JW-IS-90/G should be most suitable before the end of mixing, and the sulfur temperature should not be too high. JW-IS-90/G non-toxic, pollution-free, with no flying, easy to disperse features. Suitable for automatic weighing, to ensure accurate weighing, in line with material safety and environmental protection requirements.
JW-IS-90/G insoluble sulfur MasterbatchCommodity name: vulcanizing agent for natural rubber and synthetic rubber. Wuxi Ju Da plastic material Co., Ltd.Composition: insoluble sulfur and a mixture of polymer and dispersant particles 13906194438 ngPolymer carrier: EPDM/SBRAppearance: light yellow particlesSpecific gravity: about 1.35-1.45 (g/cm3)Sulfur content%: about 68-70Ash%: about 5.5Recommended use: 1-5 copies
The vulcanizing agent is certainly required products, specifically what kind of vulcanized silicone rubber production, in which the use of products, what are the requirements and standards, to achieve performance, what are these, need to consider to use a combination of what kind of raw material
