What is the number of parameters of the motor frequency of the Siemens inverter?
It is best to provide the model of the inverter Oh!
Siemens inverter motor pole number parameter code is r0313 motor pole pairs. Note that the number of pole pairs.
Different types of Siemens frequency changer pole pair parameters different. 6SE70 is p109;
The following is the p109 parameter description:
P109 *
Motor #PolePairs
109
For the synchronous / asynchronous motor input motor pole pairs of the function parameters.
If the rated frequency (P107) and rated speed (P108) change, automatic calculation
This parameter, if necessary, checks and verifies this parameter.
note:
- for some of the pulsed encoders (P130 = 11, 12, 15, 16)
The maximum number of pole pairs of P109 = 15 can be achieved
- P109 must be written when the write function (P060 = 6) is implemented.
- Automatic calculation of the pole pair on the motor with regenerative feedback on the rated data
Number to be added.
Where the function map:
360.2, 361.2, 362.2, 363.2, 364.2
?
MM4 series is r313, which is calculated by the input rated frequency and rated speed calculated read-only value, must be selected in the p3900 to calculate the correct value. You can also set pole pairs by p314.
?
S120; G110; G120; G130; G150; S150 with MM4 series.
