What is the principle of cleaning machine parts? How should the parts be kept after cleaning?
Mainly to remove the parts of the oil, (fine) processing residue, etc., if it is solvent based cleaning agent, as long as the dry cleaning, water cleaning, then you need to dry. According to the production requirements, if the next step directly on the production line, then there is no need to do anti oxidation measures, if stored in the storage, on the one hand packaging, but also to do anti oxidation measures.
In the mechanical field assembly process, for some long-term storage or process reasons lead to rust, iron filings, oil pollution and other problems,Cleaning must be done. This is a relatively sophisticated process, if the cleaning is improper or not in place, it will affect the assembly quality and assembly schedule,Finally, the whole machine is running. Therefore, it is necessary to master the proper cleaning method and process
The cleaned parts should be kept in a dry, ventilated place and coated with a thin layer of butter when necessary. Flat type parts must be flat, the middle shall not be suspended; shaft parts can not be placed flat, must be vertical suspension, to prevent bending.
Cleaning of precision parts usually requires special cleaning agents. Canned high pressure sprays are expensive, but the cleaning effect is very good, volatile, and parts will not rust. Ordinary cleaning parts can be washed with water, but must add parts cleaning agent (bags, a bit like a soap, but wet, low price) to prevent rust, cleaning after drying can be, if there is a high pressure air drying is better, but this kind of cleaning agent is injured hand, should wear gloves when cleaning.
