What is the process flow of the wardrobe?
Wardrobe production process seems very simple to people, the three steps of the opening, edge banding and drilling, the equipment used is also no open sawing, edge sealing machine, drilling. The main point of the structure is nothing more than the 32 series disassembly and assembly and so on. In fact, the overall wardrobe production process is much more complicated than these.
A complete sense of the overall wardrobe production process, from the preparation of raw materials, carpentry, paint, finishing to the final product packaging, warehousing and many other aspects and steps. Is also a board member, some as long as one or two steps can be completed, while others need ten or even dozens of procedures to complete. Such as drawer bottom, as long as the opening can be, and such as a more complex floor panels, the structure is honeycombed, hollow, face veneer, edges of solid wood edges and edges, but also inlaid with glass. The single panel will be two processing steps to complete, so closely related to design, complexity of plate process with the products of the product structure, materials and types of products on the production line number and other factors, the more the more complex factors involved.
The main production process of the whole wardrobe:The whole wardrobe because of the surface material and the surface decorative effect of the different process are not the same, the main representative categories: veneer whole wardrobe, a whole wardrobe, solid color stickers whole wardrobe, melamine whole wardrobe and mixed categories consisting of the above categories for two or more of the whole wardrobe. These categories of overall wardrobe process flow based process, there are some special, such as bending board, paste thickness, etc.. In the actual operation process, because of cost and other factors, usually you have me, I have you, it is worth mentioning that at present with the wide application of honeycomb core, processing the whole wardrobe will be more complex.
The main components of the panel process include raw materials, process documentation, machinery, equipment, operators, and quality and production management systems. Time and place where raw materials are the premise and basis for the entire process, while the process files is the whole process and management activities according to a comprehensive and detailed process documents, process documents about the whole wardrobe renderings, three views, parts decomposition diagram, parts processing drawings, hardware accessories, packaging solutions, list installation diagram, raw material list (BOM), manual parts processing process, products. Among them, parts processing drawings should be used in conjunction with the parts processing flow chart and run simultaneously with the parts and components of the production line. The effect is the best. The main contents of the parts processing flow sheet should cover the name, specifications, quantity, materials, batch, processing notes, special inspection standards, hours, procedures and serial numbers and other basic content. Machining equipment and operators are processing guarantees.
