What is the processing glass is glued to it? Can you fall off
4, the glass should be mechanical milling treatment, the number of grinding wheel should be more than 180 mesh.
3, glass and aluminum alloy frame groove should be flexible contact with rubber gasket.
2, glass and slot overlap and other fit size should be consistent with "aluminum alloy window" (GB / T8479) in the provisions.
Edible glass is the use of glass edging machine for furniture glass and architectural glass and process glass processing, mainly for ordinary flat glass bottom and chamfer grinding, polishing.
1, the choice of glass: glass thickness determined by calculation, and should not be less than 5mm. Building the following parts of the doors and windows must use safety glass (tempered glass or laminated glass):
1) 7 floors and 7 floors above the building outside the window;
2) window glass with an area greater than 1.5;
3) glass bottom edge of the final decoration surface less than 500mm of the floor window;
4) with the horizontal angle of less than 75 ° inclined roof and from the indoor floor is greater than 3m tilt window;
5) Glass doors with glass area greater than 0.5;
6) Frameless glass door should be used not less than 10mm thickness of the tempered glass.
