What is the pulse voltage of the step motor driver
The input signal of the normal step motor drive is adjusted for 5V level. If the voltage of the control signal is greater than 5V, it must also be added to the current resistance. The size of the extra resistance should be explained in the driver documentation. But more outputs signals such as PLC control equipment for both 12 v, 24 v, if the driver is supporting, may drive the input has to adapt to the 12 v or 24 v voltage. Therefore, if you want to replace the existing drive, it is best to understand the voltage of the device's output control signal first. If it is your own device that wants to control the drive of the finished product, and there is no data on the drive, you can try the effect with a low voltage signal, such as a 5V signal.
Step motor drive pulse voltage: -5v, -24v input + 1.6 K resistance.It's usually minus 5V, minus 24V input plus 1.6 K resistance.
The pulse voltage of the step motor drive is -5v; The step motor drive is an actuator that converts electrical impulses into angular displacement. When stepping drive receives a pulse signal, it is driving a stepper motor according to set the direction of a fixed Angle (called "step Angle"), its rotation is based on the Angle of the fixed step by step. It can control the amount of angular displacement by controlling the number of pulses, so as to achieve accurate positioning. At the same time, the speed and acceleration of the motor can be controlled by controlling the pulse frequency to achieve the goal of speed adjustment and positioning.
