What is the reason for the oil running out of the turbine oil filter?
Improvement measures for running oil in exhaust port of vacuum oil filter:Check the reasons for the failure to start the automatic heating of the sealing oil filter oil.Stop sealing oil filter before checking out the cause.Strengthen the operation inspection of the sealed oil filter, ensure the automatic operation of the oil pump, the oil pump and the electric heater chain, and carry out the transmission test regularly on the chain of sealed oil filter.Using the opportunity of unit overhaul to improve the exhaust pipe of sealed oil filter and vacuum pump, completely eliminate the hidden trouble of oil leakage of oil filter.Strengthen the training of operators, fully grasp the working principle of the sealed oil vacuum oil filter, as well as the matters needing attention in the operation process and the accident treatment.
When the viscosity of the oil becomes larger, the oil quantity in the lower part of the vacuum tank is reduced through the filter screen, resulting in the liquid level switch not reaching the action value, and the oil inlet pump fails to stop together, resulting in continuous oil spill at the vacuum pump outlet.After the temperature of sealing oil is lower, the main reason of this event is that the mechanical and electrical heater of oil filter is not automatically put into operation
What caused the vacuum? The exhaust of the oil purifier will run out of oil? There are three main factors:When the oil temperature is low, the viscosity of the oil becomes larger, and the oil foam remaining on the filter can not fall down in time. When the suction port is filled, the vacuum pump is pumped to the condensing tank and overflowed through the outlet pipe of the vacuum pump.
