What is the reason why the packing belt breaks easily?
For a long time, and do not pay attention to cleaning, resulting in packaging machine hot tongue on the dirt is too much, as long as sandpaper is used to rub off the stain on it;3, semi automatic packing automatic packing machine or the hot side, packaged hot melt zone is too small, the use of pliers correction;
The lower part of the middle blade of the baler is deformed, and the middle blade must be replaced;5, operators in the work did not wait for the packing machine on the pallet back, move down the goods, hot melt surface has not been condensed
When packaging, if packaged with fracture, may be packing machine pulling force is too strong, can adjust the tension knob. If packaged with other normal use, may be a problem with the packing quality, bear tensile strength not too big, you can consider replacing the package. If it is from the joint. Disconnect, may be caused by the following reasons: 1, packing belt is not suitable for the temperature setting, the summer should be at about 450 degrees in winter in the north to about 600 degrees;
