What is the relation between the number of teeth of carbide saw blades?
1., it is mainly used for longitudinal sawing of small diameter logs. According to the size of the pre adjustment, a plurality of sheets can be sawed off at one feed, which is widely used in the sawing process of the front path, small diameter and log sawing of blockboard and finger jointing factories. 2. compared with the band saw, the processing efficiency is high, the precision is high, the operation is simple and convenient, the technical requirement of the worker is not high, and the defects of low processing precision, low efficiency and high operation technical requirements of the band saw are compensated. What is the difference between the 1:40 tooth and the 60 tooth? Because of the small friction, the 40 teeth will save effort, and the noise will be small, but the 60 teeth will be cut more smoothly. A carpenter usually uses 40 teeth. The price is the same, ha ha. For small sounds, use thicker ones, but thin quality is better. The more the number of teeth, the more smooth the cut section. If your machine is stable, the sound will be smaller. What is the difference between the 2:30 wood cut saw blade and the 40 Tooth cut wood saw blade? Main: 1 cutting speed is different. 2 different gloss. The angle of the teeth of the 3 saw blade itself is different.
Hard alloy tooth less than wood section tooth more smooth, less than the price of gear teeth is cheap, less than the number of gear teeth is not easy to burn saw, if multiple saw tooth must use less, if it is a plywood class, must use the teeth reduce edge collapse.
4 saw blade body hardness, flatness, end jump requirements are also different. In addition, there are some requirements for the speed of the machine and the feeding speed of the wood. 6, to do the saw blade equipment precision also has the very big relations. 7 'chopping waist' is the most difficult thing to do right now. Another: alloy blade why open? Prevent saw blades; increase friction. For example: 3: multi tooth and Small Tooth cut wood saw blade, what's the difference? The number of teeth of the toothed, generally more number of teeth, more cutting edge in unit time, the cutting performance is better, but the cutting teeth with hard alloy saw blade number, the price is high, but the serrated teeth too close, chip quantity is small, easy to cause the blade fever; the other saw too much when the amount of feed, with improper words cut per tooth little friction will increase the cutting edge and the workpiece, the influence of blade service life. Usually, the pitch of teeth is 15-25mm, and the reasonable number of teeth should be selected according to the cutting material.
