What are the screens for mobile phones, PE, PET, PC, PVC, PMMA, or other plastic?
Mobile protective film material has the following: PP material, PVC material, PET material, AR material, PE material, OPP material and other materials.PP material does not have any adsorption capacity, usually with glue to stick, tear off the screen will leave the glue mark, long will corrode the screen.
AR material is the best kind of screen protection paste on the market at present. AR is a synthetic material, generally divided into three layers, silica adsorption layer, PET as the middle layer, the outer layer for special treatment. Special treatment is generally divided into two layers, AG layer and HC layer, AG is anti glare matte, protective film is the use of this method is.HC hardness processing approach is used in high transparent protective film. The screen protective film screen is not reflective, transparent and high (above 95%), will not affect the display screen.PE material is LLDPE, the material is relatively soft, has a certain tensile properties.OPP material of mobile phone protection film from the appearance of relatively close to the PET protective film, its hardness is greater, there is a certain degree of flame retardancy, but its paste the use of poor results, the general market is rarely used.
PVC material itself is soft and paste easy, but this material is thick, light transmittance is not good, so that the screen looks more obscure. It also leaves a mark of glue on the screen. This material is also relatively easy to change with temperature and turn yellow oil, short service life.PET material is the most common kind of protective film material on the market at present. The texture is relatively hard, and it is more scratch resistant.