What is the selection of the oil filter for the turbine?
If you only request to filter one or two tons a day, the general TYAXD-50 type turbine oil filter is enough, if you request 5 tons per day and above, must not be less than 100 liters per minute. Incidentally, such as TAXD-50 oil filter, digital generally refers to 50 liters per minute, for every hour is 3000 liters per hour, about 3 tons, but taking into account the many oil filter machines need recycling several times, so traffic can be considered slightly larger
In addition, you are centralized filtration (that is, putting all the steam turbine waste in one place to filter), or on-line filtering will also affect the selection of the flow rate of the oil filter. For example, you centralized filtration, large amount of oil, if you request a day after the filtering, it must be 100 liters per minute or more, if you want to waste online filtration cycle, then certainly not centralized so high, so we can choose small flow. Also, look at your filter time requirements,
Steam turbines are generally used by power plants, so the amount of steam turbine oil is large and the demand for filtration is relatively strong. As for the selection of the flow rate of the turbine oil filter, this can be chosen according to the quantity of oil used in your factory and how many tons are required to be filtered every day
