What is the standard for ASME GASKET?
There are many kinds of ASME fasteners, such as A320-B8, A194-8, A193-B8, A193-B8, Cl2 and so on. Do use, processing, distribution of the United States, bolts and nuts, bolts nuts, bolts and nuts American Standard, must have the standard screws. Can buy a set of the latest United States fasteners standard "IFI British standard fasteners manual" as a reference.
A gasket (washer) is a hole (usually in the middle) of a thin plate (usually round), usually used to distribute threads of load fasteners. Other uses are used as spacers, springs (Baer, gasket, wave washer), wear-resistant pads, pre display devices, and locking devices. Rubber gaskets are also used on taps (valves) to cut off flowing liquids or gases. Rubber or silicone gaskets are also available to reduce vibration of the fan. Usually the outer diameter of the gasket is about two times the inside diameter.
Shim：The gasket is made of paper, rubber or copper sheet, placed between the two surfaces to strengthen the sealing material and to prevent the leakage of the fluid from the sealing element between the static and closed covers.Gaskets (gasket) are mechanical seals between two bodies, usually used to prevent pressure, corrosion, and natural heat expansion, cold contraction and leakage between two bodies. Because machined surfaces are not perfect, gaskets can be used to fill the irregularity. Gaskets are usually made of sheet materials such as cushion paper, rubber, silicone rubber, metal, cork, felt, neoprene, nitrile rubber, fiberglass or plastic polymers (such as Teflon). Gaskets for specific applications may contain asbestos.
