What is the use of tile adhesives?
Just stick it to the wall / floor in order and press it down. And adjust the tile position within the specified time. Wet cement can be removed with water, but cured only by mechanical means.
With the special tooth type scraper to full mortar to 5 mm thick base number 3 (that is, on the ceramic tile thickness of sand slurry, and then with a scraper) with a tooth shaped side in a straight line or S shaped pull stripe, scraper plane and the base plane intersection is 45 degrees to 60 degrees. Tiles need not be soaked,
The adhesive for the Chenguang ceramic tile reduces the dependence of the traditional construction process on the process of sprinkling and soaking bricks at the grass-roots level, and avoids the problem of insufficient sprinkling caused by the immersion bricks.1, a packet of materials according to the designated mixing ratio of mixing, stirring until the uniform without caking, let the slurry stand for 3 to 5 minutes, and then stir once, you can use.2, select the appropriate gear scraper to ensure that the effective paste area is at least 65% of the tile area.
