The door is not knowledgeable, now has been shaking, I opened the door line, which did not fix things on the wall,
I read a door-mounted video, as if with iron fixed on the wall, I intend to buy a few linear angle code when the iron fixed on the wall, do not know whether it is feasible, so no other to do after the fixed, right?
The door frame is fixed with an expansion tube, some with a large nail. Indoor doors, if it is woodworking master site custom, are generally nails. If it is finished door, with expansion tube into, and then cover the door sets. Who gave you install you can find him and let him reinstall.
The door is a technical live, it is recommended to find professional carpenters to do
The door frame is fixed with an expansion tube, some with a large nail. Indoor doors, if it is woodworking master site custom, are generally nails. If it is finished door, with expansion tube into, and then cover the door sets.
First check the doors of the various parts are complete, the size of the parts are correct, assigned to the corresponding position to the corresponding position is consistent with the door.
1, the goods to be installed on the ground level, do not lean on.
2, not on the paint products should be painted within five days.
3, try to avoid outdoor sunshine for a long time to prevent the door heated.
4, to keep the indoor air circulation, to prevent the frequent moisture of the wooden doors.
5, to prevent the wooden doors are not normal impact, not too much should not force too much.
6, is strictly prohibited in the door nail hanging heavy objects.
7, corner wall, T-wall before the installation of the door should be notified to customers in the first side of the stack without "false wall", the width of the size of not less than 50mm, according to the width of the line to determine the "false wall" Otherwise, both sides show asymmetrical door edges.
8, single fan open the door, the door of the child, double fan door to open the hole size (set plate thickness of 32mm): door height = door height +40 mm, door width = door width +65 mm. Other types of combination doors are subject to the specific circumstances (note: the height of the hole is the height of the hole from the ground has been done, the width of the hole, the thickness is the net size).
