What is the working principle of the oil filter?
There is a rotor with double jet nozzle in its interior, only produced by oil pressure to provide the driving force. After opening, the pump will be sent to the oil tank inside the rotor, the rotor to be full of oil after the rotary table lower nozzle jet, which creates a driving force for the high-speed rotation of the rotor. Its speed can reach more than 4000-6000r.p.m, the power generated by the gravity of more than 2000 times, the principle of centrifugal force directly drive impurities from the oil in the separation. Hard, sharp, abrasive metal substance, plus residual products that cause parts to wear or deteriorate, even the size of 1 m can be removed. The impurities separated the impurities in the rotor of the collection cover, just cleaned regularly. In addition, because the proportion of water than oil, under the action of centrifugal force, the water from the oil separated from the existing rotor inner product oil receiver and only can be removed during cleaning. The filtered oil flows back into the tank directly by gravity.
Which creates a driving force for the high-speed rotation of the rotor. Its speed can reach more than 4000-6000r.p.m, the power generated by the gravity of more than 2000 times, the principle of centrifugal force directly drive impurities from the oil in the separation.
Working principle of oil filterThere is a rotor with double jet nozzle in its interior, only produced by oil pressure to provide the driving force. After the device is opened, the oil in the tank is sent to the rotor through the pump. When the oil is filled with the rotor, the nozzle is ejected along the lower part of the turntable
Oil filterAn oil filter is a filter device for removing mechanical impurities, byproducts and moisture in impure oil by gravity, centrifugal, pressure, vacuum distillation, mass transfer and other techniques. Oil filter is mainly used to improve the cleanliness of machinery and electrical oil, so as to give full play to the best performance and extend the service life of equipment.
