What kind of drinking fountains do you have?
Classification by refrigerationCan be divided into electronic refrigeration and compression mechanism, cold type of two categories, and each category is divided into desktop and vertical water dispenser. Electronic refrigeration water dispenser adopts semiconductor component refrigeration, also called semiconductor refrigeration water dispenser. It has the characteristics of small power consumption, low operating noise, no pollution, automatic control and low price. The disadvantage is that the refrigeration speed is slow, the supply of cold water is less, and it is suitable for families and units with less drinking water. Compressor refrigeration water dispenser and refrigerator refrigeration principle is same, different evaporator around stainless steel water tank wall, heat absorption water cooling, the cooling capacity of about 3L, the cooling power in between 75 and 110W, has the characteristics of high reliability, high cooling efficiency, cooling speed, water supply and so on, the the refrigeration performance is significantly better than the electronic cooling water machine, but the price is expensive, suitable for drinking a large number of families and units.
Classification by drinking water temperatureCan be divided into warm type, hot and cold type and three temperature type of three categories. Warm type drinking water machine is provided with a normal temperature / hot water faucet, respectively /88 - 96 DEG C temperature of water supply of hot water; cold hot drinking machine due to cold water temperature is low, also known as ice and hot drinking water machine, the machine is cold / hot water faucet, respectively, to supply 5 to 12 DEG C to 96 DEG /88 cold water hot water temperature; three types of drinking water the machine is the two models of the integrated function, set three taps, respectively with normal temperature, cold water and hot water supply.
Classification by shapeCan be divided into desktop and vertical (or floor type) two categories. Table drinking fountains generally do not have sterilizing cabinets or lockers, so they are smaller in size and easier to move. The upper half of the vertical drinking machine is a water dispenser, and the lower part is a sterilizing cabinet or a storage cabinet, which can sterilize tea sets or store fresh foods, and small refrigerators are also provided for refrigerating drinks in different models.
Classification by water sourceCan be divided into two categories: bottled water and tap water. Bottled water is a 18.9L (5 gallon) or 11.3L water source, supplied by a water supply center. The drinking water machine tap water drinking machine in addition to the above features, the machine is also provided for reverse osmosis (RO) water machine or filter cartridge, can automatically filter the tap water into the use of power is water, drinking water machine products is the most versatile, its characteristic is no need to replace the bottle, low maintenance cost, the use of convenient. However, this type of water dispenser needs regular replacement of filter cores and membranes, which is expensive.Classified by mode of controlIt can be divided into three types: general control type, intelligent induction type and micro computer control type. Ordinary control water dispenser, its heating and cooling are automatic constant temperature control, is the most widely used models. Intelligent induction type drinking machine using infrared sensor, distance less than 7 meters, from the angle of 120 degrees, people in the automatic start, automatic shutdown delay left a few minutes later, with the characteristics of safe use, automatic switch machine, energy saving. Microcomputer control, heating and cooling automatic temperature control, with water temperature display, temperature settings, many stalls, accurate temperature control, regular cut-off power supply, a variety of operations, such as sound and light tips.
