What kind of glue does the lampshade use?
Hot melt adhesive The average hardware store sells. The heat causes physical changes, solidifies quickly, solidifies the milky white after solidification, and by melting degree seep into the fabric fiber. Commonly used with glue gun. If the bulb is too hot, it is not recommended.
latex Cheaper glue. Also be a kind of glue that is physical change, dry then colorless, not afraid of hot, afraid of water. Because the length of time is long, the whole operation is relatively long. The pressure on the glue will be stronger. UHU With corrosive glue, it is commonly used in model classes. Colorless and transparent, have certain fluidity, can infiltrate cloth fiber to be fixed slightly. It's a little bit longer than the hot glue, but it lasts longer than the hot glue. Use this adhesive to first scrape a layer of cloth, let the glue first seep into the fabric fiber, and then apply the glue to the feather root in half dry condition.
The glue is strong, but the smell is relatively strong. You don't need to use them if you're putting a light on a lamp. 502, the type AB glue is the adhesive that belongs to the resin class, usually not in the cloth class, unless the fabric is hardened.
