What kind of material does the Tong Tong do well?
People who use tools must be familiar with the performance, characteristics, use, storage, maintenance and maintenance of the tools. The use of pliers is operated with the right hand. The jaw is inward, so that it is convenient to control the cutting part of the pliers, and the small finger is extended between the two clamp handles to counteract the handle of the clamp, and the Zhang Kaiqian head is separated, so that the handle of the pliers is flexible.
The cutting edge of the bevel tong can be used to cut the rubber or plastic insulating layer of soft wires. The cutting edge of pliers can also be used to cut wires and wires. Cut No. 8 galvanized iron wire, use the knife edge to cut the surface several times, and then only a slight wrench, the wire is broken. Cutting mouth can also be used to cut metal wire, wire line hard etc.. Electrical commonly used in 150, 175, 200 and 250mm and other specifications. It can be purchased according to the inside or outside line. The jaw of the pliers can also be used for fastening or loosening the nut.
Inclined pliers are generally made of cast iron. A general term for an alloy consisting mainly of iron, carbon, and silicon. In these alloys, the carbon content exceeds the amount retained in the austenite solid solution at the eutectic temperature.Diagonal pliers mainly used for cutting wire, wire components redundant, is often used instead of ordinary scissors shearing insulating sleeve, nylon wire etc..
