Marble polishing: marble polishing 1, the main material: K1, K2, K3 crystal. K1 liquid is a stone crystal mirror agent, suitable for dark marble, K2 liquid is a stone surface hardening agent, used for stone finish, plus hard light, forming protective film and crystal mirror on the surface. K3 is made of durable natural wax resin, which can form high gloss on the stone surface, and can repair the scratch of stone. The effect is lasting, and meanwhile, it has anti slip performance.
The recrystallization process, recrystallization of marble processing is a popular method of maintenance of marble, marble recrystallization is divided into two parts, one part refers to the part of machine tool, the other part is a special chemical material; chemical materials and into two types: one is another type of granite recrystallization. Marble is recrystallization. The basic principle is the crystallization of stone will produce some special chemical materials by mechanical friction when the heat binding reaction and structure of marble surface, have a crystalline hard layer of the use of these stone recrystallization of granite and marble stone floor maintenance, can make Dali light fresh and natural effect. Can also improve the surface of the marble wear-resisting degree, make its luster more lasting. In general, granite ground for two years, so that maintenance can be. But marble ground due to differences in texture, generally need 6 months or so to do such a maintenance, but the specific depends on the degree of marble surface wear and tear.
The whole floor grinding: marble glue after drying and grinding grinding on the overall use of the ground machine, the whole horizontal grinding, grinding key caulking glue at the stone between (corner stone between) and close to the wall, decorative style, special shape at the edge of the stone floor to keep the overall smooth, polished finish again and again for marble glue caulking caulking finish to continue for second times and then polished stone retreading machine with steel mill stone tablets from coarse to fine, (150 mesh, 300 mesh, 500 mesh, 800 mesh, 1000 mesh, 1500 mesh and 2000 mesh), a total of seven times to complete the burnish surface overall smooth, use steel wool polishing, polishing to achieve the design requirements of the degree of brightness (70 degrees), no obvious gaps between the stones.
1, construction procedure: stone ground surface cleaning, stone gap marble glue repair, whole ground ground dry grinding 6-7 times, ground treatment, crystallization treatment (K2, K3, whole ground drops) maintenance treatment (K1 drops), ground maintenance.2, stone ground surface cleaning: stone ground crystallization treatment before paving surface finish overall smooth, no color, each stone between the diagonal ground flush, overall cleaning, use a clean dry mop to clean up the ground without sand, impurities.3, stone gap marble glue repair: stone surface cleaned, repaired to each stone above small spot with the marble glue, the original stone with the color of marble near the glue to repair the damaged surface. Then use the slot machine dedicated to the original stone stone installation of the raphe re neatly cut slot, make the width of gap becomes almost, and close to the stone color on the marble glue to fill (Note: if you've already done raphe processing is new open without seam). Such as dry glue can do the next procedure must be repaired after the marble glue.
