What machine saw? Wood saw is smooth and not polished
At present, the technology has not such a saw, which is caused by its working principle, the interval of the local employment saw wood, to saw body not be clamped and staggered sawtooth, which saw a road section on the sawn wood. In contrast, the fine teeth are smaller than the rough teeth. But it must not be as smooth as cutting meat.
With saw blade sawing wood, sawing section without gouging, sanding and so on absolutely bright and clean, there is no good method. However, for high-quality timber, the general use of a single saw machine, with alloy saw blade sawing. The alloy saw blade cutting wood can be produced in the band saw the plane effect, the cutting surface is smooth, only a relatively small saw, after sanding can reach very high smooth effect.Single saw many manufacturers have sold, recommended Xinma woodworking products, the price is about 20000 yuan
Because of the characteristics of wood, do not use metal cutting, laser knife will burn out section, water will soak bad wood, so this requirement cannot be done.
I'll try this on it. It's cut with a fine grinding wheel. It's very smooth and basically needs no polishing. But fine grinding wheels can only cut small pieces of wood, and large ones do not. In addition, after cutting the fine grinding wheel, the cut part will be carbonized at high temperature and the color will be black!!
