What oil can be used instead of the saw mixture?
Use fine chain saw lubricants to keep the oil below the oil level to reduce wear of chains and saw teeth. Because the chain lubricating oil will be completely discharged into the environment, ordinary lubricating oil is a petroleum based and non degradable, will pollute the environment, it is recommended to make use of biodegradable oil chain, many developed countries have rigid regulations to avoid environmental pollution.
Mixed proportion of gasoline and oil: high branch saw two stroke engine oil engine for 1: 50, 1 and 50 shares of gasoline engine oil; using other TC grade engine oil is 1: 25, 1 and 25 shares of gasoline engine oil. The mixing method is to pour the oil into a tank that allows fuel to be loaded, and then pour it into the gas mixture. Gasoline engine oil mixture will be aging, the general configuration should not exceed one month's use. Special attention should be paid to avoiding direct contact between the gasoline and the skin to avoid breathing the gas that the gasoline evaporates.
Chain saws require gasoline, engine oil, and chain saw lubricants:Petrol can only be used with unleaded gasoline no more than 90. When adding gasoline, the fuel tank lid and the gas tank must be cleaned before refueling so as not to have debris entering the tank. The high branch saw should be placed in a flat place so that the fuel tank is facing up. Don't let the gasoline spill when you fill it up. Don't fill the tank too full. After refueling, always use your hands to tighten the fuel tank cover.You can only use high quality two stroke engine oil to ensure a longer engine life. Do not use an ordinary four stroke engine. When using other two stroke engine oils, the model shall be of grade TC quality. Poor quality gasoline or oil can damage the engine, seals, oil passages, and tanks.
The general use of mixed oil and gasoline gasoline engine oil.Chainsaw is to gasoline powered portable saws, mainly used for wood and paper material, its working principle is L shaped blade lateral movement by staggered saw chain of shearing action.
