What qualifications do you need to learn woodworking engraving machines?.
Woodworking engraving machine operator in practice may be excellent technical, but the engraving machine knowledge has many omissions, Nanjing speed design to provide you with the engraving machine operation common sense. I. application of materials: operators must be familiar with the range of application of various materials, familiar with different materials, different thickness, different size of finished products, etc.. Be familiar with different materials in different ways of engraving.
First, wood carving, in general, the sculpture on the wood is usually overcast carving, and engraving machine depth requirements generally deep. In this way, the power is generally higher, and if the harder wood is encountered, it may make the engraving darker. If you want to make it lighter, increase the engraving speed and try to carve it several times. Some wood in the carving will produce some smoke, attached to the surface of the wood, if the wood has been painted brush, you can wipe it with a damp cloth, and if not painted may be wiped clean, resulting in surface fouling. Wood cutting. Woodworking engraving machine for cutting wood depth is not deep, the maximum power cutting depth depends on the wood materials and laser, such as cutting thick wood, cutting speed can be slowed, but may be caused by the burning of wood. Specific operation, you can try to use large lenses, and repeated cutting method. Two, logs (unprocessed wood) wood is by far the most commonly used laser processing materials, it is easy to engrave and cut. Light colored wood, such as birch, cherry, or maple, is easily vaporized by lasers and is therefore more suitable for carving. Each kind of wood label has its own characteristics, some are dense, such as hardwood, in engraving or cutting, you need to use more laser power. We recommend carving less familiar wood prior to studying engraving characteristics. Three, plywood in plywood engraving, in fact, in engraving, milling machine, wood carving is not very different, but there is a little attention, the engraving depth can not be too deep. The edges of the plywood after cutting will also be blackened like wood, the key is to see if plywood is made of that wood. Four, coloring more engraving machine engraving milling machine knowledge, please pay attention to Nanjing speed creation design
Theoretical basis: training must begin with theoretical training, and operators must carry out practical training under the conditions of theoretical examination. If the theoretical training has not been adopted, it is very difficult to conduct operational training. Three, engraving machine tool use problems: after theoretical training, we must carry out the training of tools. Operators can be familiar with tools, engraving motor speed, speed, attention, etc., must be clear, operators must be familiar with the application of cutting tools. Four, the machine operation training: after training above, trained personnel and operating personnel to explain the understanding of assessment: the operation safety and operation precautions of operator training, by training personnel in the operation of security considerations on signature recognition, machine operation training operation personnel. Five, engraving machine software operations: after the above training, software training can be carried out. The training of software mainly focuses on the field of user application, and the user does not need the self-study manual according to the training manual. Software requirements are: all kinds of software typesetting, various operations, path generation, can quickly find the path errors. Six, engraving machine operation of various matters needing attention and engraving machine maintenance training.
