What's the difference between a hot electric kettle and an electric kettle?
With a heating function of the kettle, most of the two hot wire, heat preservation hot wire is generally controlled by the heat switch alone, the power is generally about 80W. 1500W power kettle, boil a pot of water for about 5 minutes or more. Generally speaking, temperature control, metal deformation, waterproof and anti dry heating are adopted to ensure safety and power failure. The use of a period of time will produce scale, water cannot drink the boiling water in the heating will be thousands, all these have an impact on health. The hot kettle is different with the traditional kettle, due to the use of hot water technology, no need to wait, the fastest 1.93 seconds out of boiling water; hot kettle with no hot liner design, there will be thousands of boiling water, the water balance of yin and Yang, level of technology will make water reflux in the pot body, the flow of water it is not easy to produce scale; instant drink, water consumption is not more environmentally friendly;
Products are water protection, anti dry design safety; the hot kettle with balance level technology, let the water in monocrystalline silicon heating pipe heating, to the top of the thermal expansion technology, natural spillover is really relatively small drops of boiling; the hot kettle of water, due to the corresponding national environmental protection and energy saving call products generally use the power of the 2200W, the conditions of the water, under normal circumstances, the water is enough. But when the electric kettle boils a kettle of water, the hot kettle doesn't yield less water than the electric kettle. Judging from the above conditions, personally feel that the hot kettle, compared to the traditional kettle more healthy, environmentally friendly, easier to use more.
The traditional kettle is heated by resistance heating wire that way, a rapid rise in temperature, in order to heat the water in the kettle, which over a period of time will heat the water in the kettle to boil, and then through the bimetal temperature sensing element deformation to push the switch off, the power down mode can not reset after power failure, so the kettle is not automatically reheated.
