What's the difference between orthogonal bevel gear and spiral bevel gear?
The spiral bevel gear has the advantages of high carrying capacity, smooth operation, insensitivity to installation error and deformation, and greater axial thrust. The running speed is higher, the grinding gear can reach 40~100 meters per second.Orthogonal bevel gears are similar to spiral bevel gears, and they are slightly worse in performance. Mainly used for bevel gear larger, with curved teeth manufacturing difficulties.
Gear: the gear is a mechanical component with teeth on the wheel flange that can continuously mesh and transmit motion and power. It is a mechanical component with teeth that can mesh with each other. The diameter of the big gear is twice the diameter of the pinion.
Bevel gears are generally referred to as bevel gears. The difference between straight and helical gears is the shape of teeth. The teeth of the spur gear are parallel to the gear shaft, and the tooth shape of the helical gear is at an angle with the gear shaft. The engagement ratio of helical gears is better when meshing, which is more suitable for occasions with large load and low rotating speed. Low speed transmission, if the load is not large, usually straight gear. Lower cost.
