What's the difference between the iron and the aluminum
If it is an ordinary turning aluminum, the average white steel knife will do, and the fine car will be cut with cutting oil. The cutter of the car iron is used with carbide tool. Generally for cemented carbide cutting tools, such as YT classes of knives, containing titanium carbide, cobalt containing less, its high hardness, high wear resistance, but the brittleness is large, suitable for finishing. In contrast, cobalt contains carbide cutting tools with less carbon titanium, suitable for rough machining. For the tools of the YG class, the higher the cobalt content, the higher the toughness of the hard alloy, and the correspondingly low heat resistance (red hardness). So hard alloy with low cobalt content is suitable for finishing. The hard alloy cutting tool of YG class is more flexible than the hard alloy cutting tool of the YT class, which is commonly used for cutting brittle materials such as cast iron.
A lathe tool is used for turning the cutting part of a cutting tool. A lathe tool is one of the most widely used knives in machining. Working part of the lathe tool is a portion of production and the processing chip, including the blade, the structure of the chip broken broken or volume approach, chip removal, or should the storage space of the chip, cutting fluid channels such as structural elements. Work part of the lathe tool is a portion of production and the processing chip, including the blade, the structure of the chip broken broken or volume approach, chip removal, or let store chip empty turning tool and cutting fluid channel between structural elements, etc. The cutting part of the tool is made up of the main cutting edge, the side cutting edge, the front edge of the knife, the face after the main and the side of the blade, and the blade of the knife. The combination of the cutting part and the handle part (the filling part) is mainly the integral, welding, mechanical clamping and weld-mechanical clamping. The mechanical clamping tool can prevent hard metal blades from cracking during high temperature welding, and the handle can be used several times. The mechanical clamping tool is used to clamp the blade tightly with screws and press plates, and the mechanical clamping tool with indexable blade. The blade can be used after being blunt, and it has been developed rapidly because of the short time.
Are you a lathe worker? Is it the same in the front and back? Car after Angle distribution in the cross section of the former solution, when outside the circle is the normal point of view, loading Angle have influence, but a good sharpener Turner is the key, please don't change turning solution by loaded askew.
