Flanges (Flange), also called flanges, flanges, or flanges. A flange is a part that is connected between the pipe and the pipe, used for the connection between the ends of the pipe. It is also used for the flange on the entrance and exit of the equipment. It is used for the connection between the two devices, such as the reducer flange.
Reducer flange for motor and reducer connection, as well as reducer and other equipment between the connection.Sort:1, according to the chemical industry standard (HG): integral flange (IF), (Th), threaded flange welding plate flange (PL), neck flange (WN), hubbed flange (SO), socket welding flange, butt welding (SW) ring loose flange (PJ/SE), flat loose flange ring lining flange (PJ/RJ), (BL (S)), flange (BL). 2, according to the petrochemical industry standard (SH): (PT), threaded flange welding flange flange (WN), (SO), socket welding flange (SW), loose flange, flange cover (LJ) (not note). 3, according to the machinery (JB) industry standard: integral flange, welded flange, welding plate flange, butt welding ring loose plate flange, welding ring loose plate flange, flange ring loose plate flange, flange cover. 4, according to the national standard (GB): integral flange, threaded flange, flange, butt welding and hubbed flange hubbed socket welding flange, butt welding neck flanges, ring plate flange, butt welding ring loose plate flange, welding ring loose plate flange, flange ring loose plate flange flange cover.
DN100 flange refers to the nominal diameter of 100mm flange.Flange connection or flange joint means that the flange, the shim and the bolt are mutually connected as a group of three detachable sealing structures. Pipe flanges are flanges used for piping in pipe installations. They are used on equipment and refer to the entrance and exit flanges of the equipment. The flange is lined with bolts to secure the two flanges. Gaskets for gaskets between flanges. Sub threaded flange connection (threaded connection), flange welding flange and flange clamp. Flanges are used in pairs. Low pressure pipes can be made of wire flanges and welded flanges with pressures of more than four kilograms. Add a gasket between the two flanges and secure with bolts. Different pressure flange thickness is different, they use the bolt is also different. Water pump and valve, and in the pipe connection, these equipment parts of the equipment also made corresponding flange shape, also known as flange connection. Any connecting parts that are bolted and closed in the vicinity of the two planes are generally referred to as flanges, such as the connections of the ventilation ducts, which can be called flanges". However, this connection is only part of a device, such as flanges and pumps connected, it is not good to call the water pump flange parts". Relatively small, such as valves, can be called flanges".
