What's the flange on the sprocket?
According to the description, spurts phenomenon is actually the roller and sprocket chain lead to alveolar not fully engaged, this 2 points to consider:First, there may be a chain pitch error, may wish to change several chains try. However, the chain is standard, this possibility is relatively small.Two is the sprocket tooth distance error, although sprocket processing is very delicate, but if it is small batch, often line cutting or milling cutter into teeth. Roundness is out of the car, easy to guarantee, the pitch is cut or milling out, it is difficult to say. The diameter of the graduated circle is not so good.
The sprocket plays a guiding role, while the flange facilitates the dismounting of the chain wheel
The flange on the chain wheel is the leading role of the chain wheel, and the flange is convenient for the disassembly and assembly of the chain wheel:Flanges, flanges, flanges, or flanges. A flange is a part that is connected between the pipe and the pipe, used for the connection between the ends of the pipe. It is also used for the flange on the entrance and exit of the equipment. It is used for the connection between the two devices, such as the reducer flange. Flange connection or flange joint means that the flange, the shim and the bolt are mutually connected as a group of three detachable sealing structures. Pipe flanges are flanges used for piping in pipe installations. They are used on equipment and refer to the entrance and exit flanges of the equipment. The flange is lined with bolts to secure the two flanges. Gaskets for gaskets between flanges. Sub threaded flange connection (threaded connection), flange welding flange and flange clamp. Flanges are used in pairs. Low pressure pipes can be made of wire flanges and welded flanges with pressures of more than four kilograms. Add a gasket between the two flanges and secure with bolts. Different pressure flange thickness is different, they use the bolt is also different. Water pump and valve, and in the pipe connection, these equipment parts of the equipment also made corresponding flange shape, also known as flange connection. Any connecting parts that are bolted and closed in the vicinity of the two planes are generally referred to as flanges, such as the connections of the ventilation ducts, which can be called flanges". However, this connection is only part of a device, such as flanges and pumps connected, it is not good to call the water pump flange parts". Relatively small, such as valves, can be called flanges".
