What's the material of the butterfly valve seat?
Tianjin saide valve limited company can provide all kinds of valve seat material for the majority of users: white food gum X1 - X2 - X3 - Hypa EPDM rubber X4 rubber X5 - resistant rubber X6 - fluorine rubber X7 - heat resistant ethylene propylene rubber X9 silicone rubber and PTFE F4.
The seating material shall meet the following criteria:1) fluid compatibility, including expansion, hardness loss, permeability, and degradation;2) hardness;3) permanent deformation;4) the degree of recovery after load removal;5) pull in and compressive strength;6) deformation before fracture;7) modulus of elasticity.
Butterfly valve seat materials commonly used include EPDM (three yuan ethylene propylene rubber), NBR (Ding Qing rubber), PTFE (PTFE), metal sealing (cemented carbide).Their scope of application is..:1, EPDM (three yuan ethylene propylene rubber): excellent weather resistance, ozone resistance, heat resistance, acid and alkali resistance, water vapor, color stability, electrical properties, oil and gas flow at room temperature. Ethylene propylene rubber products can be used at 120 degrees for a long time and can be used briefly or intermittently at 150-200 degrees centigrade.2, NBR (Ding Qing rubber): from butadiene and acrylonitrile was prepared by emulsion polymerization, nitrile rubber by emulsion polymerization at low temperature, excellent oil resistance, high wear resistance, good heat resistance, strong adhesion. Its disadvantages are poor resistance to low temperature, poor ozone resistance, poor electrical properties, and slightly lower elasticity.3, PTFE (polytetrafluoroethylene): can be used at 260 degrees for continuous use, with the highest use temperature of 290-320 degrees, low coefficient of friction, good wear resistance, and excellent chemical stability. It can not be injection molded and can be extruded or painted. PTFE's unique properties make it widely used in chemical, petroleum, textile, food, paper making, medical, electronic and mechanical industries and marine operations.4, metal seal (hard alloy): metal seal valve seat material has good resistance to high temperature, high pressure resistance, corrosion resistance and wear resistance, but the high requirements of the processing technology, the biggest drawback is the long time operation is easy to generate leakage.
