What's the process of continuous winding glass fiber reinforced plastic sand pipe?
(1) die: the continuous flat steel supported by the reel, winding to form a round mandrel.(2) feeding: when the mandrel moves, advanced packing, glass fiber, resin and surface material are accurately placed under the control of program control (PLC) and microcomputer (PC).(3) monitoring: according to the prepared material input program, only the basic pipeline data can be input; the computer can calculate the mechanical operation settings by itself. Material consumption, pipe thickness and so on will be constantly monitored and recorded.(4) curing: induction heating of the curing process of the product is accomplished by the flat band and the infrared device which is directly heated in the product. The temperature of 20 different parts of the product in the curing zone will be measured and displayed in the form of an image on the computer screen.(5) cutting and trimming: the pipe can be cut from 0.3 meters to 18 meters under the predetermined length. The cutting, chamfering and caliber measurement are coordinated with the longitudinal movement of the product to ensure the accurate vertical cutting of the glass fibre reinforced plastic pipe and the killing of the outer diameter.
On line inspection: the pipe being cut and grinded is delivered to the water pressure test machine through the conveyor. After the test is qualified, the pipe joint which has been tested by hydraulic pressure is sent to the pipe joint installation machine for joint installation.
In the continuous output of the mold, the resin, chopped fiber and quartz sand according to certain requirements, the use of circumferential winding method of continuous laying, and after curing cut into a certain length of pipe products a method. The equipment has the advantages of convenient process control, low labor intensity, little pollution, good working environment, high production efficiency and stable quality of pipe material.
