What's the size of the 1 inch flange? What's the thread of the hole on the flange?
An inch of flange is DN25 (nominal diameter), and the outer diameter of the corresponding British pipe is 33.7mm, corresponding to the outer diameter of the metric tube is 32mmLater you ask how big the bolts on the flange are, don't they? M12 is OK
It's an inch size, depending on what kind of flange you want, and one inch is 25.4 centimeters.The American Standard flange is expressed in inches. Domestic flanges are represented by DN for flange type and size, the DN25 A series is 34 in diameter (tubing), and the B series is 32 in diameter (tubing)
1 inch flange is 4 holes, the size of the hole to be, according to the pressure size minimum 11, maximum 18. Matching thread M10~M16.Flange:Flanges (Flange), also called flanges, flanges, or flanges. A flange is a part that is connected between the pipe and the pipe, used for the connection between the ends of the pipe. It is also used for the flange on the entrance and exit of the equipment. It is used for the connection between the two devices, such as the reducer flange. Flange connection or flange joint means that the flange, the shim and the bolt are mutually connected as a group of three detachable sealing structures. Pipe flanges are flanges used for piping in pipe installations. They are used on equipment and refer to the entrance and exit flanges of the equipment. The flange is lined with bolts to secure the two flanges. Gaskets for gaskets between flanges. Sub threaded flange connection (threaded connection), flange welding flange and flange clamp. Flanges are used in pairs. Low pressure pipes can be made of wire flanges and welded flanges with pressures of more than four kilograms. Add a gasket between the two flanges and secure with bolts. Different pressure flange thickness is different, they use the bolt is also different. Water pump and valve, and in the pipe connection, these equipment parts of the equipment also made corresponding flange shape, also known as flange connection. Any connecting parts that are bolted and closed in the vicinity of the two planes are generally referred to as flanges, such as the connections of the ventilation ducts, which can be called flanges". However, this connection is only part of a device, such as flanges and pumps connected, it is not good to call the water pump flange parts". Relatively small, such as valves, can be called flanges".Reducer flange for motor and reducer connection, as well as reducer and other equipment between the connection.
